Rear invisible Electromagnetic Backup Sensor Proxel with Display Wireless

Description

INVISIBLE
Without drilling the bumper
MADE in Italy
Produced in Italy
The guarantee and the quality of
Made in Italy
Directly from the manufacturer
Designed and produced in Italy. FWe supply reliability since
1993
.
Without changing the aesthetics of the car
Thanks to the installation of the sensor inside the bumper, it does not affect the bumper line.
Rear electromagnetic parking sensors mod.
EPS-DUAL 4.0 with Display Wireless
The rear Electromagnetic backup sensor  mod.
EPS-DUAL 4.0 with Display Wireless
is completely invisible and it does not change the look of your car.
The main feature of this new version is
the special connection between the control unit and the antenna sensor which is constituted by a small electronic module.
This allows a more secure assembly by eliminating the possibility of malfunction due to incorrect installation.
The approach the obstacle is always indicated with increasing "bips" and visual LED's (Zones) alerting you of your proximity to surrounding objects.
The electronic central unit is positioned within the car near the rear lights.
Details
Display
Display with multicolored LED
Buzzer integrated
Wireless
Cable:
2,0 meters / 5 feet
A:
10 cm / 4 inch
B:
2 cm / 0,8 inch
Depth:
1,5 cm / 0,6 inch
Color:
black
Main features
Range
from 70/80 cm. (28/32 inches) up to a few centimeters/inches
Obstacles detected
all shapes and materials
Sensitivity
adjustment with 4 pre-set sensitivities
Power
connection to the reversing lamp
Activation
with the insertion of the reverse gear
Antenna sensor Length
3,5 meters / 12 feet (can be cut to the length of the bumper)
Display alimentation cable length
2,0 meters / 6,5 feet
Data Cable length
1,5 meters / 5 feet
Compatible with CAN BUS and CHECK CONTROL
No interference with other on-board equipments
Antenna sensor  installation
on the innner surface of the bumper
Display
Display Wireless with multicolored LED and buzzer integrated
Antenna sensor
Unlike classical "button" sensors our Electromagnetic backup sensors use a single sensor that is attached to the inside surface of the bumper.
The antenna sensor is an aluminum
strip 1 cm (0,4 inch)long 3.5 meters high and thick a few tenths of a millimeter (thousandth of an inch).
Once applied from one end to the other of the bumper the excess can be cut away.
Details
Where to install the sensor antenna on your car:
We suggest the
position of the antenna sensor
in the bumper. If your car is not
listed
please report it via
e-mail
indicating the model and production year of registration.
Vehicles that are not compatible:
The following vehicles are NOT compatible with the backup sensor EPS-DUAL 4.0 with Display Wireless:
Pickup Mazda | Mitsubishi L200 | Nissan Patrol (with metal bumper) | Nissan Pathfinder (version with spare wheel on the tailgate) | Nissan Navara | Toyota Rav 4 (before 2006) | Audi A4 (2006) | Fiat Doblo (pre 2010) | Isuzu D-Max | VW T5 California | volkswagen amarok | Nissan Primastar | Jeep Cherokee (version with spare wheel on the tailgate) | Jeep Wrangler | Peugeot Partner Tepee | Mitsubishi Pajero | Mercedes ML 2002 | VW Caddy | Hyundai H1 | Suzuki Splash (2014) | Fiat Ducato |  Fiat Fullback | Land Rover Discovery 2 | Land Rover Defender | Mercedes Vito | Range Rover 1999 | Renault Trafic | Toyota Hilux | Mercedes Citan | Opel Vivaro |
By buying this product on our website you will be entitled to:
3 years warranty
Manufacturer's technical support
Italian product
Precautions for the Audi A4 and Audi A6 (4f):
On some versions of the Audi A4 and Audi A6 (4f) you can not install the standard antenna sensor supplied with model EPS-DUAL 4.0 with Display Wireless but you must use a specific antenna sensor (
details
). You can request this special type of antenna sensor writing on the notes before submitting the order.
Installation instructions
Mounting Instructions rear backup sensor mod. EPS-DUAL 4.0 with Display Wireless
More information
For more information and specifications go to our website:
www.proxel.com